Installation instructions:
1. original car type tainmenteffect, and then re vet mo button, re is threaded sinside. 2. Remove screws often fixed on air-conditioning of the Board of Directors Awards until the Council. 3. Awards until the back panel of the console error emovethescrews, then takeout con Sola pen 4 metres and covers an area of Remove screws often on air con dit ions Governing Board, take CD module 5. Takeout plugins often on CD unit, then cut off the support Panel sole con.
Installation instructions:
1. Disassemble the two handles in the lower part of the bumper and make the silencer (reception down with rubber handles). 2. in existing holes in the left and right chassis States introduced two special nuts (Caget Nut, 44x17mm). 3. cut a portion of the bumper (in the axis of symmetry of the, in the lower egde): width 50 mm, depth 30 mm 1.4. Put the main wsporczy bar (POS. 1) to the chassis members in this way, wsporczy openings undertakes to nuts (previously added) and patch all M10x35mm using screws (POS. 5) from accessories.
Installation instructions:
1. turn on the ignition and disconnect the Terminal negative battery vehicle. 2. Unbolt and remove bonnet of the vehicle. 3. remove the breather Assembly of the vehicle as shown; Press the yellow cards to the issue. 4. Unclip and remove the inlet hose with inter in the air and throttle Body. 5. remove the air of a complete a set of field from the vehicle by pulling it firmly upwards. 6. remove the tube breather air battery from the
Installation instructions:
STEP 1:
Connect the 14 pin connector on the of the loom supplied to the network adapter.
STEP 2:
Connect the unilink connector and 3.5 mm jack plug of the supplied loom to the rear of the unit head of Sony. Ensure the arrow is on top of the unilink connector and plug jack 3.5 mm that is pushed firmly on the main unit of Sony.
STEP 3:
Insert the original power and speaker leads with vehicle harness Connects2.
STEP 4:
Unit head of Sony Connect unused at the end of the supplied cables.
STEP 5:
If the Assembly auto-changer unilink bus
Installation instructions:
1 boot Tray manufactured from rubber-coloured washable coating, high-sided tray not only protects against dirty items, but will also include a small leakage of liquid in the boot. 2 Boot mat made from hard durable carpet, Mata is an ideal complement to customized start-up kit front mats. 3 Net boot practical limit loose items in boot such as 4 stores under the a high level of load NET helps prevent injury to the passenger restraint systems, baggage and other articles carried in the boot area with shelves deleted parcels.
