2009 Porsche 997/997S installation instructions mufflers

Installation instructions:
1. place the car on a lift or safely jack up car as per the manual owner of Porscheand always use stands of Jack. Make sure that the car is safe on all 4 points. Delete both the rear wheels be easier access to parentheses rear silencer. Spray some WD40 or grease on the 2 screws on the back of the rear tyres, the silencer for 2 screws on the top of the silencer, and the connection header so bracket 2 bolts can be removed and sleeve clamps to connect basic and 2ndary silencer. 2. Remove the exhaust from a Downloadcar tips 997 with torque so as not to damage the bumper valance while removing the silencer 2ndary and for easy access to the screw flange header. 3. using a socket

readmore..

Installation instructions for the 944 Centre console

Installation instructions:
1) delete the ashtray. 2) remove the radio. (In fact you don't have to. You'll see later.) 3) in the cartridge holder, at the back are two bolts. Delete them. 4) in front of the cartridge holder, where sitting ashtray, there are two small screws. Delete them. Now it should be possible to remove the cartridge holder. 5) On the rear part of the crop are two small screws to move. Delete them. 6) the removal of the Pocket, which is located under the radio. Simply pulls. 7) of the shift boot still attached Downloadshould be able to Lift this crop from the console. It will be necessary

readmore..

Porsche 996 Turbo exhaust and Tech Tips installation instructions

Installation instructions:
Step 1: raise the car with floor Jack and supports it with Jack stands, refer to the user manual of the owner if you are not sure how to raise the car with Jack floors. Their Porsche generally has particular points, which can be used for the abstraction of the car, located at the front wheels underneath rocker panelare those points.
Step 2: Remove the rear taillights.

readmore..

Installation instructions for the exhaust mufflers Porsche 997 NHP

Installation instructions:
Step 1: raise the car with floor Jack and supports it with Jack stands, refer to the user manual of the owner if you are not sure how to raise the car with Jack floors. Their Porsche generally has particular points, which can be used for the abstraction of the car, located at the front of the rear wheels underneath rocker panelare those points.
Step 2: loosen the nuts 13 mm clamps the cores, which catalysts to combine mufflers, after obtaining the nuts in the push motion losen twist clamp away further catalytic converter. If the sleeves are difficult to move, you can spray some WD40 enabling them to easily slide.

readmore..

Porsche Boxster fitted Diagnosis

Porsche Boxster fitted as standard with anti-lock braking system (ABS 5.3). "Traction Control (TC)" can be obtained at the special request on the basis of ABS 5.3. Traction Control (TC) is a combination of anti-slip control (ASR) and Automatic Brake Differential (ABD). TC is a further system to improve driving safety.

5.3 ABS fitted optimized with respect to volume and weight compared with ABS 5 (5 in 993 ABS). Control module (No. 1), the hydraulic unit (No. 7), pump motor relay and the relay valve (No. 2) from ABS 5.3 and ABS / TC 5.3 is a unit that was placed next to the brake master cylinder.

readmore..