2007 TOYOTA TUNDRA SHIFT SPORT KNOB installation manual, 1. Preconditioning of the vehicle. (FJ Cruiser appears) (a) the vehicle shall be on a flat surface, and not to a slope/decline. (b) fully engage the parking brake. (c) remove the lid release locking shift. Save for later use. (Fig. 1-1) (d) push the button lock release shift. (Figure 1-2) (e) shifter tool point in lower gears. (Fig. 1-3) 2. Remove OE Shift Knob. (a) remove the OE selecting shift knob clock control-wise. (b) reject the OE shift knob 3. Install the Shift Knob. (a) to install the shift knob turning clock-wise. (1) When fully installed, there must be a 1/2 "+/-3/32" (12 mm +/-2 mm) gap between the bottom of the shift knob axis and the top surface shift gate. (2) the "barrel" shift knob must go hand in hand with length of the vehicle. (3) point shift lever in the "Park". (4) replaces the lid release locking shift. (5) cleaning the shift knob with a non-zero.
Download
No comments :
Post a Comment
Note: Only a member of this blog may post a comment.