The Interior ventilation filter, Acura RDX, TL, TSX, Honda Accord, Civic, CR-V. Ventilation filter inside the filter housing is located in the glove compartment door.
1. open the glove box door. Grasp and push down on the door of gloves with rod on the right side door glove box.
2. Insert the screws flat tip the driver door glove box stays and gently apply pressure inside the Chamber to remove the glove box door stays. Bottom of the door swing glove box.
3. (some models 2004) push push-pins Center hole (2) is located on the left and right-hand sides of the glove compartment lid and eject unlock them. After the contacts are, slowly remove the CAP Chamber glove box to the right. Are close to (10) the pins clamp which will come from a sequence. Unplug the electrical connectors (2) since the lid of the Chamber of the gloves and remove the cover.
4. remove the filter housing cover and slide the filter from the housing.
5. the installation is in reverse order of removal.
No comments :
Post a Comment
Note: Only a member of this blog may post a comment.